M .A - 003
Superplasticizer And Set Retarding Admixture ( ASTM C494 Type -G )

Description

MA 003 is an advanced technology
polycaboxylate based 3rd generation admixture and their
retention and rheology property is specially
formulated to suit Myanmar climate environment.
It can give high dispersion performance and slump
retention due to steric and electrostatic repulsion
effect in high ambient temperature.MA 003 can be used
in concreting work which need water
reducing more than 30% and high performance concreting work.
Its can reduce bleeding in fresh
concrete stage and cracks in hard-earned concrete
due to polymer structure reinforcement in the
concrete .

PROPERTIES

Improvement of properties of the fresh concrete by:
- Good workability
- Low risk on concreting delay
- High slump retention
- Reduction of construction joints
- Less bleeding
- No segregation, in case of over dosage
- High Tensile and compressive strength
- Improve the water impermeability

TECHNICAL DATA

Type : Super plasticizer and set retarding admixture
Standard : ASTM C-494 Type G
Appearance : White Light
Typical Dosage : 0.8% - 1.5% weight of cement
Specific Gravity : 1.065 ± 0.02

PACKING

200 liters drum or 20 liters pail.

Other Service

We arranged the technical service are cracking, site complain, production and QC Control Management and all over the production management.

M.A – 002

High Range Water reducing Admixture ( ASTM C -494 Type F )
Description

M.A - 002 is the third generation super plasticizer polycarboxylate copolymer for concrete and mortar.
M.A - 002 is the high range water reducing admixture and water reducing range is 40% of original water
based on raw materials. The products of raw
materials used to Germany and produced in Myanmar , formulated to suit Myanmar climate environment.

PROPERTIES

Improvement of properties of the fresh concrete by:
- Good Workability
- Setting time and high strength are gained in early ages.
- High range water reducing
- Reduced the cement content
- Reduced the water cement ratio

TECHNICAL DATA

Type : High Range Water Reducing Agent
Standard : ASTM C -494 Type F
Appearance : Light Yellow
Typical Dosages : 0.8 % - 1.5 %
Specific Gravity : 1.08 ± 0.02

PACKING

200 liters drum or 20 liters pail.

Batching Plant

I . Plant 35m3/hr

1. Mixer Truck or AG Car = 2 or 3
2. Wheel loader = 1
3. Operator & Helper = 3 or 4
4. Plant installion

II . Plant 60 m3/hr

1. Mixer Truck or AG Car = 2 or 3
2. Wheel loader = 1
3. Operator & Helper = 3 or 4
4. Plant installion